allen bradley distributors Care Maintenance Interval Reference

2023-02-28

allen bradley distributors care and maintenance intervals should be followed to ensure the longevity and performance of your equipment.

For starters, it is important to check the oil level in the distributor every 500 hours of operation or every 6 months, whichever comes first. If the oil level is low, it should be topped off with the recommended oil type.

It is also important to check the distributor cap and rotor for wear and tear every 500 hours of operation or every 6 months, whichever comes first. If the cap and rotor are worn, they should be replaced.

The distributor should also be inspected for any signs of corrosion or damage every 500 hours of operation or every 6 months, whichever comes first. If any corrosion or damage is found, it should be addressed immediately.

The distributor should also be cleaned and lubricated every 500 hours of operation or every 6 months, whichever comes first. This will help to ensure that the distributor is running smoothly and efficiently.

Finally, the distributor should be tested for proper operation every 500 hours of operation or every 6 months, whichever comes first. This will help to ensure that the distributor is functioning properly and that it is providing the correct spark to the engine.

By following these maintenance intervals, you can help to ensure that your allen bradley distributors is running smoothly and efficiently for years to come.