One Price One World : PLC Wholsale

USD

Allen Bradley programmable controller imported from abroad shall have the following qualifications
2023-01-10

The built-in memory chip is used in the control part to automatically record the field data at the moment before the input voltage is lower than the rated voltage. The Allen Bradley programmable controller imported from abroad must have the following qualifications.

The programmable control board (PCI) supports CE, FWA, UL, cULus, and the isolated digital field bus connecting to hazardous areas.

The programmable logic controller (PCI) supports various input, output (I/O), digital input/output (analog input/output), and digital input/output combination logic PLC programmable high-speed counters.

The communication between DOLDON PLC master station PLCs can be used for serial bus system directly used for Ethernet and PC. Data exchange between SCPI cable and PC or via Ethernet/IP bus can be used.

● LOGO! Maintenance and saving storage time MicroMaster420 can realize simple and easy to learn configuration.

● LED displays the process and understands process variables such as process pressure, process temperature and differential pressure of frequency converter.

● SOP-8BC conforms to CE certification: CE mark ● Wide power supply: 100A: DC24V (to ensure easy use of the product) ● SOP-8BC terminal interface standardization, high-performance conversion and direct torque control ● It has multi segment speed.

● The product can be integrated through PROFIBUS and PROFINET; ● Adopt PROFINET and PROFINET for integration.

● It has the function of automatic zero clearing, which is more convenient for debugging; ● The keyboard is convenient for setting parameters, which can be set directly in the parameters; ● Modular structure design is adopted to facilitate maintenance, and on-site commissioning becomes very convenient and fast;

● Digital technology is adopted to realize the connection and disconnection of switches and connect with peripheral equipment; ● The action resistance has a wide range and is applicable to disconnectors within the range of 200V~270V to ensure higher isolation effect for customers;

● A full range of solutions, a new type of disconnector with high contact isolation, high touch screen display function, status indicator display function, two position relay (excluding ordinary relay) function, diversified functions such as manual and automatic mechanical operation, function switching under conventional isolation mode, opening position indication function of master change-over switch and multiple mechanical interlocking control functions.

● Two contact forms, automatic and manual, are provided for users to choose. This function can be configured for the control of various equipment by using the IO Link communication interface, such as the optional full range of light control, artificial lighting control, factory automation, information and intelligence.

● It provides the control of various tripping levels (such as voltage loss tripping coil, adjustable voltage tripping coil, etc.).

● Circuit to be protected. To provide protection for circuit breaker or disconnector, remote control is also required for control circuit.

● The required circuit breaker, disconnector and circuit breaker can be closed by the combination of circuit breaker or non disconnector.

● Contact reset ● Arc extinguishing can be replaced by using insulated grid double break contact operation ● With insulated grid double break contact, its price is low and its reliability is high ● The mechanical life can reach 6 million times ● The breaking capacity of the circuit breaker can be simply set ● Rated voltage: AC220V~380V 50/60HZ 5A ● Insulation voltage range: AC1000V~480V 20/60HZ 6A ● Intelligent control technology, communication technology, sensor technology, measurement and control technology are connected with the computer, Make the control system of the device universal. JX-21W low-voltage protection unit, JX-21H level 0, JX-22W intelligent control system, relay, contactor, overload protection, open phase protection, non electric quantity protection, phase sequence protection, residual current action, automatic reclosing, receiving, tripping, resetting (with positioning).

Molded case circuit breaker, miniature circuit breaker, universal circuit breaker, contactor, soft start, DC relay, contactor, soft start accessories, counter, terminal block, auxiliary connector, capacitor, miniature circuit breaker, contactor, relay, seat.

Disclaimer: The product information displayed by Home of Machinery and Electronics is released and provided by members themselves. Home of Machinery and Electronics will not be responsible for the authenticity, accuracy and legitimacy of the product information. Electric parts Qinghai accessories.

● Turning radius constant current: 40mm~500mm. ● Peak power: 10V~20A. ● Restore factory settings: Restore: the contact person is connected by the extended SMS user to ensure operation: restore date setting: restore program setting (h effective setting), set strict installation mode setting. The F201/F2 setting has no concept of equipment parts, so it is set through the A/B timer. ERR 7 is set without equipment part number, so it needs to be set through G/A2 setting.

<< Allen Bradley PLC single number query platform

>> Management skills of Allen Bradley PLC R&D team