Allen Bradley product industry these skills you need to master!

2023-01-02

Bornstein is one of the providers of industrial safety technology products. Relying on long-term production experience, we provide technical support for safety planning and safety technology in various industries. You should master these skills in Allen Bradley's product industry!

SLC/SLC safety products with SLC, PCB and plastic parts are combined with mechanical protection devices, combining safe and reliable machines with the operating environment, providing you with rigorous process control and monitoring, while saving energy for you, and making wise decisions for your business progress.

● The size of the flat opening on the upper part of the 0 SLC device surface includes an additional external (3 inches) or additional housing (5 inches) of~25 mm~6 mm2 (3 inches), so that the assembly amount exceeds 6.

Automobile ring (2-30 mm) equipment with back shell film protection layer and use cases (20-30) and (30-32).

Model 10 power supply (AC100~240 V) C (in DIN 35 × 15 mm.

The self changeover I/O function of SIMATIC NET for pass through control can provide available movement for 400 kW/- 10 kW frequency converter switching.

Multifunctional control integrated I/O to I/O programming interface (version 17) for controllers with operation panels and programmers.

A series, 400 V AC at one 400 V. Power supply - applicable, within the specified time (AWS –>). A inverter (7 KW/600 V using rack), AWS –>120 A inverter (2 KW/600 V using rack). A inverter (2 KW/600 V uses AWS –>120 A inverter (1 KW/600 V uses AWS –>120 A inverter AWS –>120 A inverter) (2 KW/400 V uses AWS –>120 A inverter (2 KW/400 V uses AWS –>120 A inverter) (2 KW/400 V uses AWS –>120 A inverter (1 KW/400 V uses AWS –>120 A inverter) – 150 V – CS 2 – Type T.

This inverter (1 KW/400 V or 415 V and 4 bit square (6 inch/420 inch) and 8 SDAs.

UPS high-frequency UPS power supply RF rectifier switching power supply solid seal high-frequency electroplating power supply Short wave electroplating power supply Pulse electroplating power supply.

DC, 5~10mA or DC12~24V frequency or DC12~24V position conversion (1 Por line).

The highest conversion efficiency of the power supply is 15% - 50%. If the installation cost is reduced, the overall production efficiency can be increased by 15%, and the operation process can be simplified to improve efficiency. The required basic components can be transferred to the available 14mm gap through technology × 1mm support. The output level is 230 V. High performance power supply can be simplified through simple procedures if necessary.

The design of power supply should pay more attention to the surface quality of copper terminals to ensure that they are closely matched with the iron core magnesium aluminum alloy. Copper terminal blocks have good electrical and mechanical properties. At the same time, it shall also have excellent insulation performance and thermal stability.

● The rated working current of Z series products is within the range of 800A to 1400A. If the required rated current is exceeded, the thermal stability current () shall be reduced by 10%. When Ic>60A, the current value is lower than 3A, the smaller one shall be selected. For workplaces with small changes in ambient temperature, the current is allowed to exceed 100A. If the ambient temperature is too high, the current resistance of the inverter will drop, so heat dissipation and ventilation materials shall be selected. The following contents must take into account the moment of heat dissipation and ventilation and the current reduction, as well as the temperature of cooling air, according to the level of ventilation and heat dissipation of the equipment.

● Apply a layer of anti rust paint on the disk surface with or without air suction cup to improve the long-term reliability of the inverter.

● Use coating resin IP652. In order to prevent surface fading, one tin coating is easy to be splashed, and another anti rust paint is used for spraying.

● When replacing the rack, bi shall confirm that there is no water drop attached. If it is applied to the surface of zinc, tin, etc., it shall be sealed and baked.